Name : Dr. G. Devaradjane
Qualification : B.Sc., B.Tech., M.E., Ph.D.,
Designation : Professor
E-mail ID : This email address is being protected from spambots. You need JavaScript enabled to view it., This email address is being protected from spambots. You need JavaScript enabled to view it.
Area of Specialization : Alternate fuels/
Automotive pollution & control/
Automotive Transmission /
Vehicle Aerodynamics.
-
Education Qualification
Sl.No.
Degree
Department
Institute/University
Year of Passing
1
Ph.D
Automobile Engg
M.I.T.Campus, Anna University
1999
2
M.E.
Automobile Engg
M.I.T.Campus, Anna University.
1987
3
B.Tech(Hons)
Automobile Engg
M.I.T.Campus, Anna University.
1982
4
B.Sc
Chemistry
University of Madras
1979
-
Experience
Period
Post Held
Name of the Institution
Nature of Duties
Jan 2009 to Till date
Professor
M.I.T.Campus, Anna University.
Teaching & Research
Jan2000 to Dec 2008
Asst Professor
M.I.T.Campus, Anna University.
Teaching & Research
April 1989 to Dec1999
Lecturer
M.I.T.Campus, Anna University.
Teaching & Research
June 1987 to April 1989
Associate Lecturer
Institute of Road & Transport Tech, Erode.
Teaching & Research
-
Publications
List of International Journal Paper:
30. G. Shankar and G. Devaradjane, “Experimental and computational analysis on aerodynamic behavior of a car model with vortex generators at different yaw angles” Journal of Applied Fluid Mechanics, Vol. 11, No. 1, pp. 285-295, 2018
29. GnanamoorthiVenkadesan, NavinMarudhanMohandossand Devaradjane Gobalakichenin, “Effect of combustion chamber geometry on performance, combustion, and emission of direct injection diesel engine with ethanol-diesel blend” International scientific journal thermal science, (2016) Vol. 20, Suppl. 4, pp. S937-S946
28. Venkatraman Mani, GnanamoorthiVenkadesanand Devaradjane Gopalakichenin, “Performance and emission study on dici and hcci engine using raw pongamia oil and diesel” International scientific journal thermal science, (2016) Vol. 20, Suppl. 4, pp. S1179-S1169
27. PremnathSundaramoorthy, Devaradjane Gobalakichenin, KathirveluBaskarand ShanmugasundaramPalaninathan “A simulation study of air flow in different types of combustion chambers for a single cylinder diesel engine” International scientific journal thermal science, (2016) Vol. 20, Suppl. 4, pp. S1145-S1151
26. VasanthanBalashanmugam * and Devaradjane Gobalakichenin, “Development of dielectric sensor to monitor the engine lubricating oil degradation” International scientific journal thermal science, (2016) Vol. 20, Suppl. 4, pp. S1061-S1069
25. AnandkumarGunasekaran and Devaradjane Gobalakichenin, “Performance and combustion analysis of mahuabiodiesel on a single cylinder compression ignition engine using electronic fuel injection system” International scientific journal thermal science, (2016) Vol. 20, Suppl. 4, pp. S1045-S1052
24. Permnath S and DevaradjaneG, “Optimization of combustion chamber along with imjection parameters for a singal cylinder diesel engine using grade analysis ans annova” Oxidation Communications, vol 39 (2016).
23. Premnath S and Devaradjane G, “Improving the performance and emission characteristics of a singal cylinder diesel engine having reentrant combustion chamber using diesel and jatropha methyl esters”, ELSEVIER journal “Ecotoxicology and Environmental Safety” 121 (2015) 10-15.
22. Suresh Kumar Gurusamy and Devaradjane G, “Innovative design of Tractor for small and marginal farms mechanisation”,SAE International journal of Commercial Vehicle 8(1):2015.
21. Gnanamoorthi G and Devaradjane G, “Effect of diesel – ethanol blends on performance, combustion and exhaust emission of a Diesel engine”, International Journal of Current Engineering and technology, Vo. 3, No. 1 (March 2013).
20. Gnanamoorthi G and Devaradjane G, “Effect of compression ratio on the performance, combustion and emission of DI diesel engione fuelled with ethanol – diesel blend”, ELSEVIER Journal of the Energy Institute, vol. xxx, pp. 1-8.
19. Gnanamoorthi G and Devaradjane G, “Experimental investigation of diesel-ethanol blend in DI diesel engine using preheating of intake air”, Advanced materials Reearch, Vol. 954-985 (2014), pp. 878-884.
18. Gnanamoorthi G and Devaradjane G,”Effect of semi thermal coatings on piston crown in internal combustion engine using ethanol diesel blend”, International Journal of Applied Environmental Sciences, Vol.9, No.10(2014), pp 323-332.
16. Premnath S and Devaradjane G, “Improving the performance and emission characteristics of a single cylinder diesel engine having reentrant combustion chamber using diesel and jatropha methyl esters”, Ecotoxicology and environmental safety – Elsevier Publications.
15. Jeyakumar P.D and Devaradjane G, “Roollover analysis of bus body structure”, European Journal of Scientific Research, Vol.71,No.1, pp. 64-71, 2012.
14. Sudeshkumar M.P and Devaradjane G, “Development of a simulation model for compression ignition engine running with ignition improver blend”, Thermal Science: International Scientific Journal, Vol.15, No.4, Pp-1131-1144, 2011.
13. Sudeshkumar M.P and Devaradjane G,”Effects of 2-ethoxy ethanol and 2-methoxy ethanol additives on engine performance and tail pipe emissions in a DI diesel engine”, International Journal of Green Energy and Environment, Vol.1,No.4,pp 8-12, 2011
12. Venkatraman.M and Devaradjane.G, “Computer Modeling of a CI Engine for Optimization of Operating Parameters Such as Compression Ratio, Injection Timing and Injection Pressure for Better Performance and Emission Using Diesel-Diesel Biodiesel Blends”, American Journal of Applied Sciences-Published by Science Publications New-York USA Vol:8 –Issue No:9, pp 897-902, August 2011.
11. Kumaresan.M and Devaradjane.G, “Experimental Investigation of Performance and Emission Characteristics of Diesel- In a Di Diesel Engine Using Double Lobed Cam Split Injection Method”, International Journal of Advanced Engineering Technology, IJAET Volume II issue Jan-March 2011
10. Sudeshkumar M.P and Devaradjane G, “Experimental analysis on the blends of oxygenated fuels with diesel in a direct injection diesel engine for performance evaluation and emission”, International Research Journal of Material Sciences, Vol.7, No.1,pp 229-234,2010.
9. Sudeshkumar M.P and Devaradjane.G,”Experimental analysis on engine performance and exhaust emission characteristics of CI engine running with blends of ignition improvers”, Internationl journal of Applied Engineering Research, Vol.%, No.11,pp1937-1946,2010.
8. Venkatraman.M and Devaradjane.G “Experimental investigation on performance and emission characteristics of diesel - jatropha methyl ester blends fueled diesel engine at optimum engine operating parameters” An International Research Journal of Material Sciences- Published by Material Science Research India-Bhopal Vol:7 No:2, pp:399-406, December 2010.
7. Venkatraman.M and Devaradjane.G“Effect of Compression ratio, Injection Timing and Injection Pressure on a DI-Diesel engine for better performance and emission fueled with diesel -diesel biodiesel blends” International journal of Applied Engineering &Research- Published by integrated publishing association-Dindugul Vol:1 No:3,pp :288-298 November 2010.
6. Venkatraman.M and Devaradjane.G, “Experimental investigation of performance and emission characteristics of diesel- pungam oil methyl esters (PME) diesel blends fueled DI diesel engine at optimum engine operating parameters” International Journal of Green Energy and Energy Environment-Published by Cape Institute of Technology-Kanyakumari, India Vol No: 1 Issue No: 3,pp 7-12 OCT 2010.
5. Kumaresan.M and Devaradjane.G, “Effect of split injection concept on emission levels of oxygenated diesel operated CI engines”, An international research journal of materials sciences, Vol. 6, June 2010
4. G.Devaradjane, and others Effect of Injection Time on the Performance and Emission of Non-edible Nerium Biodiesel Operated Diesel Engine in the International journal of Applied Engineering Research,Vol. 5,No.14,2010
3. G.Devaradjane and others Influence of injection timing on performance,emission,combustion analysis and sound characteristics of Nerium biodiesel operated single cylinder four stroke cycle direct injection diesel engine in International journal of Material Science research India.Vol.5,No.1,June 2010.
2. S.Sundarapandian, G.Devaradjane, ‘Performance and Emission Analysis of Bio-Diesel Operated CI Engine’ in Journal of Engineering, Computing and Architecture ISSN 1934-7197, of Scientific Journals International, Volume 1, Issue 2, 2007- July 2007
1. A.K.Babu, G.Devaradjane, ‘Vegetable oils and their derivatives as fuels for C.I.Engines, An overview’ at 2003 SAE World Congress, Detroit, Michigan during March 3-6, 2003. Also published in 2003 SAE Transactions.
List of National Journal Papers:
4. Kumaresan.M and Devaradjane.G, “Experimental investigation on the effect of split injection concept and the performance and emission characteristics of DI diesel engine using diesel oxygenated compound blends”, I-Managers Journal on future engineering and technology, vol 5, issue no 4, May-July 2010.
3. Kumaresan.M and Devaradjane.G, “Experimental investigation of performance and emission characteristics of oxygenated compounds in a DI diesel engine using split injection method”, Indian Journal of Engineering and Materials Sciences, ISSN 0971-4588 June 2010.
2. S.Sundarapandian, G.Devaradjane, “Computer Simulation of C.I Engine using Vegetable Oil Esters”, in the I-manager’s Journal on Engineering & Technology, Vol 2, No2, Nov 06-Jan 07, pp94-104.
1. G.Devaradjane, “Effects of split injection on diesel engine pollutants using multizone model” in the Indian Journal of Engineering & Materials Sciences, Vol 8, June 2001, pp129-135.
List of International and National Conference Papers:
14. Jeyakumar P.D and Devaradjane G, “Improvement of the Frontal structure of a Bus for Crash accidents” ASME 2012 International Mechanical Engineering congress and Exposition, Houston, Texas, USA, November 2012.
13. Venkataraman M and Devaradjane G, “Optimization of operating parameters on the performance andEmission of a CI engine operated with diesel-pungamia biodiesel blend” ASME 2012 International Mechanical Engineering congress and Exposition, Houston, Texas, USA, November 2012.
12. Sudeshkumar M.P and Devaradjane G, " Experimental investigation on Combustion characteristics, Engine Performance and Emissions of a diesel engine fuelled with Oxygenated blends” ASME 2012 International Mechanical Engineering congress and Exposition, Houston, Texas, USA, November 2012.
11. Sudeshkumar M.P and Devaradjane G, “ Simulation studies for the prediction of engine performance in a diesel engine running with ignition improver blend”, XXII national Conference on IC Engines and Combustion, Calicut, Kerala, India, December 2011.
10. Sudeshkumar M.P and Devaradjane G, “Experimental analysis on the blends of oxy-fuels with diesel in a direct injection CI engine for performance evaluation and emissions”, XXI national Conference on IC Engines and Combustion, Davangere, Karnataka, India, December 10-12, 2009.
9. T.Saravanakumar, G.Devaradjane, P.Lingeswaramurthy, “ Investigations on the performance of Gerotor type of Oil pump used in Automobiles”, Proc. of IPRoMM 2009, Industrial problems on Mechanisms and Machinery, a National Conference, conducted by IIITD&M Kancheepuram & IIT Madras.
8. T.Saravanakumar, G.Devaradjane, P.Lingeswaramurthy, “ Investigations on the performance of Gerotor type of Oil pump used in Automobiles”, Proc. of IPRoMM 2009, Industrial problems on Mechanisms and Machinery, a National Conference, conducted by IIITD&M Kancheepuram & IIT Madras.
7. M.Venkatraman, G.Devaradjane, ‘Numerical Prediction of flow over bluff bodies in a Gas Turbine combustion chamber using CFD code’, at International Conference & XX National Conference on IC Engines and Combustion at JNTU, Hyderabad, India, during December 6-9, 2007.
6. M.P.Sudeshkumar, G.Devaradjane, ‘Study of Effects of Oxygenates on Performance & Emissions in a DI Diesel Engine’, at International Conference & XX National Conference on IC Engines and Combustion at JNTU, Hyderabad, India, during December 6-9, 2007.
5. V.Gnanamoorthi, G.Devaradjane, ‘Effects of Oxygenated Compounds on Performance Characteristics and Emission Levels of Direct Injection Diesel Engine’, at International Conference & XX National Conference on IC Engines and Combustion at JNTU, Hyderabad, India, during December 6-9, 2007.
4. S.Sundarapandian, G.Devaradjane, ‘Theoretical and Experimental Prediction of the Performance of Vegetable operated CI Engine’, at International Conference & XX National Conference on IC Engines and Combustion at JNTU, Hyderabad, India, during December 6-9, 2007.
3. G.Devaradjane, and others “Oxidation Processes for the Treatment of Exhaust Emission by SCR Catalyst” held at International Conference on Advanced Oxidation Processes,ACESSD,Kottayam,Kerala,India.
2. P.Srinivasan, G.Devaradjane, “Experimental Investigations on performance and Emission Characteristics of Diesel fuel blended with 2-Ethoxy Ethyl Acetate and 2-Butoxy Ethanol” presented at 2008 SAE International Powertrains, Fuels and Lubricants Congress, June 2008, at Shanghai, China.
1. S.Sundarapandian, G.Devaradjane, “Theoretical Investigation on Performance Characteristics of Bio-Diesel as alternative fuel in CI Engine” at 6th Asia-Pacific Conference on Combustion during May 20-23, 2007 at Nagoya, Japan.
-
Seminar/conference/workshop attended
11. ASME 2012 International Mechanical Engineering congress and Exposition, Houston, Texas, USA, November 2012.
10. International Conference & XX National Conference on IC Engines and Combustion at JNTU, Hyderabad, India, during December 6-9, 2007.
9. 6th Asia-Pacific Conference on Combustion during May 20-23, 2007 at Nagoya, Japan.
8. XVIII National Conference on IC engines and Combustion at College of Engineering, Thiruvanthapuram, India, during December 17-19, 2003.
7. SAE International Mobility Conference at Chennai, India, during January 10-12, 2002.
6.XV National Conference on IC Engines and Combustion at Anna University, Chennai, India, during December 17-19, 1997.
5.National Seminar on Energy management at Institute of Engineers,(India), Allahabad, India, during March 2-3, 1995.
4. ISME Conference on Mechanical Engineering, New Delhi, India, during March 5-6, 1993.
3. 8th National Convention of Mechanical Engineers, Roorkee, India, during October 30-31 and November1, 1992.
2.XII National Conference on IC Engines and Combustion at Indian Institute of Petroleum, Dehra Dun, India, during September15-18, 1992.
1. XI National Conference on IC Engines and Combustion at IIT Madres, India, during December 11-15, 1980.
-
Contribution to Department
Participation in Departmental Developmental Activities:
i) Worked for the up gradation of “Vehicle Re-condition Laboratory” (purchase and installation of Optical Wheel Alignment Gauge, Oil Seal L.O.P. Test Rig & Coil Spring Tester).
ii) Working as Co-coordinator for the up-gradation of “Automobile pollution Control Laboratory” under the “Modernization and Removal of Obsolence” scheme of AICTE project, 1998.
Participation in Consultancy and Testing:
Worked for the testing of ASHOK LEYLAND Automotive engines for performance and emissions for M/s Ashok Leyland Ltd.
Co-curricular Activities:
i) Served as “Deputy Hostel Superintendent”.
ii) Served as Staff in-charge for Dept library
iii) Served as Faculty Adviser for SAE club
iv) Served as “President” of Automobile Engineering Association.
Associated Academic Activities:
i) Acted as Chief Superintendent of Examinations at MIT during 2002-2003.
ii) Member of Board of Studies for Automobile Engineering For Anna University and PSG college of Technology.
iii) Panel of Examiners for Automobile Engineering.
iv) Member of Society of Automotive Engineers.
v) Deliver Guest Lectures regularly in various affiliated collages, SAE India chapters Meetings and in Refresher courses for faculty.
vi) Acting as Inspection Committee Member for affiliated colleges affiliation.
vii) Acted as Deputy Director in the office of Director, Academic Courses, Anna University for two years – Feb2006 to Feb2008..
viii) SAE INDIA Southern Section’s Executive member for two year – between 2006 and 2008.
ix) Acted as Head of the Department from 2010 to 2014
GRANTS OBTAINED FOR THE DEPARTMENT FROM FUNDING AGENCIES:
i) FIST program from DST for Vehicle Dynamics lab for Rs.106.00 lakhs during 2015.
ii) DRS-I programme under SAP from UGC for Vehicle Dynamics lab for Rs. 109.00 lakhs during 2016.
-
Others
Guidance of Ph.D : No of Ph.D On-Going = 5 Candidates
No of Ph.D Completed = 10 Candidates
Ph.D Examinership : Ph.D thesis evaluator for Bharathiar
University, Andhra University & NIT Trichy
Countries visited : (i) Visited Nagoya, Japan for presenting my research paper in 9th Asia Pacific conference on Combustion during 2008.
(ii) Visited Michigan Tech, Houghton, Michigan, U.S for Research collaboration in automotive field.
(iii) Visited Houston, Texas, U.S for presenting research papers at ASME conference during Nov 2012.