Deans Profile

Dr.A.JOSEPH STANLEY

DEAN, MIT

Name	:	Dr. A.JOSEPH STANLEY
Date of Birth	:	13^th May 1951

Office Address	:	Dean, MIT Campus, Chromepet Chennai 600 044. Ph. 22232403

EDUCATION:
S.No.	Course / Programme	Year	School / College	Specialization
1	S.S.L.C.	1967	St. Joseph High School, Trichy
2	B.Sc.	1971	St. Joseph College, Trichy	Mathematics (Major)
3	D.M.I.T	1974	MIT, Chennai	Aeronautical Engg.
4	M.E.	1976	Madras University, Chennai	Aircraft Structural Mechanics
5	Ph.D	1996	IIT, Madras	Applied Mechanics

MEMBERSHIP TO PROFESSIONAL BODIES:

1. Fellow of Aeronautical Society of India (F.Ae. S.I)
2. Member in Institution of Engineers (MIE)

CAREER

S.No.	Organization	From	To	Designation
1	G.T.R.E., Bangalore	Jan. 1977	Sep. 1978	Senior Scientific Officer
2	M.I.T. Anna University	Sep. 1978	May 1985	Associate Lecturer
3	M.I.T. Anna University	June 1985	July 1996	Lecturer
4	M.I.T. Anna University	July 1996	Aug. 2003	Assistant Professor
5	M.I.T. Anna University	Aug. 2003	Continuing	Professor

ADMINISTRATIVE POSTS HELD

S.No.	Designation	From	To
1	Executive Warden, MIT Hostels	2001	2004
2	Head of the Department of Aerospace Engineering	2004	2007
3	Director, Centre for Aerospace Research (CASR)	2007	2008
4	DEAN, MIT	2008	Till Date

RESEARCH

Papers published	21 International and National Journals 18 International and National Conferences
Ph.D. Produced	2
Ph.Ds Guiding	5
Area of specialization	Aircraft Structures

DEVELOPMENTAL ACTIVITIES:

Ø Developed Aircraft Structures Laboratory
Ø Prepared laboratory manuals for Aircraft Structures Laboratory
Ø Prepared laboratory manuals for Experimental Techniques & Instrumentation Laboratory

PRINCIPAL INVESTIGATOR FOR THE FOLLOWING SPONSORED PROJECTS:

S.No.	Title of the Project	Sponsoring Agency	Amount (Rs. In Lakhs)
1	Virtual Instrumentation of Wind Tunnel	AICTE, New Delhi	10.00
2	Design of 3-D Spacer Fabric	Aeronautics Research & Development Board (AR&DB), New Delhi	6.60
3	Fund for Improvement in Science & Technology (FIST)	DST, New Delhi	58.00

CHAIRMAN ORGANIZING COMMITTEE FOR THE FOLLOWING NATIONAL CONFERENCES:

S.No.	Name of the Conference	Sponsored by	Year
1	Current Status & Emerging Trends of Aircraft Development in India	Aeronautical Society of India and Anna University	7,8 – Jan 2005
2	Recent Advances in Computational Methods in Aerospace Engineering	Aeronautical Society of India and Anna University	24,25 – Feb 2006
3	Changing Trends in Civil Aviation in India	Aeronautical Society of India and Anna University	2,3 – Mar 2007

CO-ORDINATOR FOR THE FOLLOWING WORKSHOPS:

S.No.	Name of the Workshop	Sponsored by	Year
1	3 days workshop on Design and Fabrication of FRP Products	TEQIP	27 – 29, Sep 2009
2	3 days workshop on NDT evaluation of Composite Structures	TEQIP	4 – 6, Oct. 2007

CO-ORDINATOR FOR THE SHORT-TERM COURSES:

S.No	Title of the Programme	Duration	No. of participants
1	Orientation Programme for ADA Executives	3^rd May – 30^th June 2004	21
2	Short-term course for ADA Scientists	21^st Nov. – 13^th Dec. 2005	18
3	Training Program for HAL Management Trainees	12^th Jun. – 14^th Jul. 2006	40
4	Technical Course for HAL Assistant Engineers	12^th Jun. – 14^th Jul. 2007	20
5	Training for HAL Management Trainees (Technical)	7^th May – 29^th Jun. 2007	35
6	Training for HAL Management Trainees (Technical)	12^th Jun. – 14^th Jul. 2007	36
7	Training for HAL Design Trainees	7^th Jan. – 28^th April 2008	44
8	Training for HAL Design Trainees	5^th Aug. – 30^th Nov. 2008	34
9	Training for HAL Design Trainees	26^th Jan. – 23^rd May 2009	51
10	Training for HAL Management Trainees (Technical)	1^st Jun. – 24^th Jul. 2009	40

ADDITIONAL RESPONSIBILITIES:

Ø                  REFREE for International Journal on “Structural Mechanics”
Ø                  Academic Council Member of Anna University Chennai (2004 – 2007, 2008 to till date)
Ø                  Chairman for Board of Studies (Mechanical Branch) of MIT (2004-2006)
Ø                  Chairman for Aeronautical Society of India, Chennai Branch (2005-2007)
Ø                  Member in AR&DB Manpower Development & Aerospace Information Panel (2004-2007)
Ø                  Syndicate Member, Anna University since Nov. 2008
Ø                  Served as Committee Member in DRDO interview panel
Ø                  Served as Committee Member in CPWD interview panel

PAPERS PUBLISHED IN INTERNATIONAL JOURNALS:

1. A. JOSEPH STANLEY and N. GANESAN (1993), “Comparison of shell theories in the analysis of cylindrical shells with discontinuity in the thickness”, Journal of Computers and Structures, 48, 1057-1071.

2. A. JOSEPH STANLEY and N. GANESAN (1993), “Deformation of cylindrical shells with discontinuity in the thickness subjected to axisymmetric loading” Journal of Computers and Structures, 49, 495-505.

3. A. JOSEPH STANLEY and N. GANESAN (1994), Deformation of orthotropic cylindrical shells with discontinuity in the thickness subjected to axisymmetric loading”, Journal of Computers and Structures, 50, 635-653.

4. A. JOSEPH STANLEY and N. GANESAN (1994), “Impulse response of cantilever beams with discontinuity in the thickness subjected to a point load”, Journal of Computers and Structures, 53, 209-217.

5. A. JOSEPH STANLEY and N. GANESAN (1995), “Deformation of orthotropic cylindrical shells with discontinuity in the thickness subjected to asymmetric loading”, Journal of Composite Structures, 30, 69-83.

6. A. JOSEPH STANLEY and N. GANESAN (1995), “Dynamic response of cantilever beams with discontinuity in the thickness subjected to a point load”, Journal of Computers and Structures, 34, 167-176.

7. A. JOSEPH STANLEY and N. GANESAN (1995), “Dynamic response of cantilever cylindrical shells with discontinuity in the thickness subjected to axisymmetric load”, Journal of Computers and Structures, 55, 667-683.

8. A. JOSEPH STANLEY and N. GANESAN (1995), “Impulse response of beams with discontinuity in the thickness subjected to a point load”, Journal of Sound and Vibration, 181, 391-400.

9. A. JOSEPH STANLEY and N. GANESAN (1995), “Impulse response of cylindrical shells with discontinuity in the thickness subjected to axisymmetric load”, Journal of Sound and vibration, 184, 369-387.

10. A. JOSEPH STANLEY and N. GANESAN (1995), “Dynamic response of cantilever cylindrical shells with discontinuity in the thickness subjected to axisymmetric load”, Journal of sound and Vibration, 184, 703-724.

11. A. JOSEPH STANLEY and N. GANESAN (1995), “Impulse response of cantilever cylindrical shells with discontinuity in the thickness subjected to axisymmetric load”, Journal of Computers and Structures, 37, 623-634.

12. A. JOSEPH STANLEY and N. GANESAN (1996), “Frequency response of shell-place combinations”, Journal of Computers and Structures, 59, 1063-1094.

13. A. JOSEPH STANLEY and N. GANESAN (1995), “Free vibration characteristics of stifferred cylindrical shells”, Journal of Computers and Structures, 63, 33-43.

14. JOSEPH STANLEY. A., KALAICHELVAN K., SIVARAMAKRISHNAN R., SARAVANAKUMAR V.P and VENKATASWAMY S. (2004), ‘Effect of Rheocast and Thixocast characteristics of Eutectic Lead-Tin alloy sheet on deep drawing’, Journal of Material Processing Technology, Vol.153-154, pp.637-642.

15. JOSEPH STANLEY A, KALAICHELVAN K., SIVARAMAKRISHNAN R., and DINAKARAN D (2005), ‘Cavity minimization and Uniformity studies on Superplastic forming of thin eutectic Pb-Sn sheet by optimum loading and preforming’, Journal of Material Processing Technology, Vol. 162-163, pp. 519-523.

16. JOSEPH STANLEY. A., SATHYAMOORTHY.S and RAJA. S. (2006), “Piezoelectric Based Adaptive wing for Flow Control, Journal of Aerospace Sciences and Technologies, 58 – 4, 305-312.

17. JOSEPH STANLEY. A and AUGUSTINE. B.S.M (2007), “Aircraft Maintenance Management and Analysis of Defect Trend for Maintenance of Aero Engines, Journal of Aerospace Sciences and Technologies, Vol.59, PP 148-156.

18. JOSEPH STANLEY. A ., ARUMUGAM. V and VAIDYANATHAN. G (2009), “Failure load composite rings using Acoustic Emission Monitoring, International Review of Aerospace Engineering (I.R.E.A.S.E), Vol.2 N I – PP 62-66.

19. JOSEPH STANLEY. A., ARUMUGAM. V., BHOOMINATHAN. R and PACKYARAJ. M (2009), “Failure load prediction of Glass / Epoxy laminates through acoustic emission monitoring, International Review of Aerospace Engineering (I.R.E.A.S.E) Voll.2, NI – PP 67-71.

PAPERS PUBLISHED IN NATIONAL JOURNALS:

1. KALAICHELVAN K., SIVARAMAKRISHNAN R., RAMASAMY P., JOSEPH STANLEY A. and VENKATASAMY S. (2004), ‘Experimental Analysis if Macro-Micro Superplastic Forming on Pb-Sn Eutectic Alloy sheets’, Journal of The Institution of Engineers (India), Vol.85, pp. 13-16.

2. KALAICHELVAN K., SIVARAMAKRISHNAN R., MURUGARAJ K and JOSEPH STANLEY A.(2002), ‘Effect of Heat Treatment on Forming Limit Strains in Aluminum alloy sheets’, Manufacturing Technology Today, Vol.3 No.8, pp.3-5.

PAPERS PUBLISHED IN INTERNATIONAL CONFERENCE:

1. KALAICHELVAN K., SIVARAMAKRISHNAN R., SARAVANAKUMAR V.P., JOSEPH STANLEY A. and VENKATASWAMY S. (2003), ‘Effect of Rheocast and Thixocast characteristics of Eutectic Lead-Tin alloy sheet on deep drawing’ International Conference on Advances in Materials and Processing Technologies, (AMPT 2003), Dublin city University, Ireland July 8 – 11, pp.732-736.

2. KALAICHELVAN K., SIVARAMAKRISHNAN R., DINAKARAN D. and JOSEPH STANLEY A. (2005), ‘Cavity minimization and Uniformity studies on Superplastic forming of thin eutectic Pb-Sn sheet by optimum loading and preforming’ International Conference on Advances in Materials and Processing Technologies, (AMPT 2005) Dublin city University, Ireland May 8 – 11, pp.732-736.

3. KALAICHELVAN K., SIVARAMAKRISHNAN R., JOSEPH STANLEY A., and VENKATASWAMY S.(2006), ‘Experimental and Finite Element Simulation of Superplastic Forming of Rectangular Pan’,International Conference on Advances in Materials Processing and Characterisation, Anna University, Chennai, Aug 28 – 30, pp.441 – 447

4. KALAICHELVAN K., VENKATESHWARALU D.,SIVARAMAKRISHNAN R., and JOSEPH STANLEY A (2006), ‘Modeling and Process Control of Superplastic Forming of Rectangular Pan’,International Conference on Advances in Materials Processing and Characterisation, Anna University ,Chennai, Aug 28 – 30, pp.448– 452.

5. SENTHIL KUMAR. C., ELANGOVAN. S., JOSEPH STANLEY. A and RATHAKRISHNAN. E., “Flow Charactieristics in a Convergent-Divergent Nozzle kept in a Supersonic Stream”, AIAA Paper No.2005-43881, 41^st AIAA/ASME/SAE/ASEE Joint Propulsion conference & Exhibition, Tucson, Arizona.

PAPERS PRESENTED IN NATIONAL CONFERENCE:

1. JOSEPH STANLEY. A., and KRISHNA REDDY. A.R (1990), “Stress Analysis of Analysis of Orthotropic plate with a hole using F.E.M”, 35^th Congress of ISTAM.

2. JOSEPH STANLEY. A and PATRICK. JOSEPH KENNEDY (1990) “Characterization of Off – axis laminates made by fording”, 35^th Congress of ISTAM.

3. JOSEPH STANLEY. A and PALANIVEL. G (1998), “Vibration Analysis of Circular Cylindrical Shells”, National Seminar on Aerospace Structures.

4. JOSEPH STANLEY. A, KALAICHELVAN. K., SIVARAMAKRISHNAN. R. and MURUGARAJ.K (2002) “Effect of Heat treatment on forming Limit Strains in Aluminum Alloy sheets” – 20^th AIMTDR, PP 432-436.

5. JOSEPH STANLEY. A., KALAICHELVAN. K., SIVARAMAKRISHNAN. R., VENKATASWAMY.S and RAMASAMY.R (2003) “Analysis of Macro and Micro superplastic forming on PH-Sn Eutectic Alloy Steels” Symposium on Advances in Metal forming”, IGCAR.

6. JOSEPH STANLEY A., KALAICHELVAN K., SIVARAMAKRISHNAN R., and BALASUBRAMANIAN. S (2004) ‘Effect of Grain Size in Microformed Component Made by Superplastic Forming’, 21^th AIMTDR, VIT, Vellore, Dec.20 – 22,pp.993

7. JOSEPH STANLEY A., KALAICHELVAN K., SIVARAMAKRISHNAN R., and DINAKARAN D (2004) ‘Non-Uniformity Minimization on Lead-Tin Superplastic thin sheet by Automatic Optimum Pressure Paths’, 21th AIMTDR, VIT, Vellore, Dec 20-22,pp.302- 307

8. JOSEPH STANLEY. A and JAI BALAJI. J (2005), “Design and Analysis of Fuselage in space structures” Proceedings of the National Conference on Advances in Engineering Design held in Bannari Amman Institute of Technology, Sathyamangalam, Vol.I, PP 511 – 514.

9. JOSEPH STANLEY. A and JAGADEESWARAN. A.S (2005), “Design and Development of stitched Sandwich structure” Proceedings of the National Conference on Advances in Engineering Design, held in Bannari Amman Institute of Technology, Sathyamangalam, Vol.II, PP 726 – 732.

10. JOSEPH STANLEY. A and KARTHIKEYAN. G (2006), “Frequency response of composite shell – plate combinations, Recent Advances in Computational Methods in Aerospace Engineering, MIT.

11. JOSEPH STANLEY A., ANTONY ARUL PRAKASH M.D and KALAICHELVAN K, (2008), ‘Evaluation of the Flexural stiffness of 3D spacer sandwich matrix Composites’,Prceedings of the National Conference on Acvances in Robotics, Precision Engineering and Manufacturing Techniques’, MIT, Anna University, pp 31-37.

12. JOSEPH STANLEY A., KALAICHELVAN K., SIVARAMAKRISHNAN R., and Venkataswamy S.(2006), ‘Experimental and Finite Element Simulation of Superplastic Forming of Rectangular Pan’,International Conference on Advances in Materials Processing and Characterisation, Anna University, Chennai, Aug 28 – 30, pp.441 – 447

13. JOSEPH STANLEY A., KALAICHELVAN K., VENKATESHWARALU and D.,SIVARAMAKRISHNAN R (2006), ‘Modeling and Process Control of Superplastic Forming of Rectangular Pan’,International Conference on Advances in Materials Processing and Characterisation, Anna University ,Chennai, Aug 28 – 30, pp.448– 452.

Dr. A.JOSEPH STANLEY

EDUCATION:

Departments

Aerospace

Automobile

Electronics

Instrumentation

Production Technology

Rubber & Plastics

Information Technology

Computer Technology

Applied Sciences and Humanities

Search