DISSERTION

• Master of Engineering

  Master of Engineering

  Manufacturing Engineering
  2013-2015
  2014-2016
  2015-2017
  2016-2018
  2017-2019
  2018-2020
  2021-2022

   

  Mechatronics Engineering
  2013-2015
  2014-2016
  2015-2017
  2016-2018
  2017-2019
  2018-2020
  2021-2022

• PhD Thesis

  Name List of Thesis: (2015 to Present)

  S.No	Name of the Scholar Reg: No:	Title of Thesis	Supervisor Name	Year
  1	Mr. M.P.NATARAJAN 2007239170	A study on development of non asbestos organic material for brake liners. URL:https://shodhganga.inflibnet.ac.in   /handle/10603/140342	Dr.B.RAJMOHAN	2015
  2	Mr. R.CHANDRASEKARAN 2914239740	Study of factors contributing to the success of entrepreneurs in manufacturing in automotive ancillary industries URL:https://shodhganga.inflibnet.ac.in /handle/10603/140368	Dr.R.KESAVAN	2015
  3	Mr. R. RAVINDER 2814239709	A study and analysis of air pollution in a metropolitan city URL:https://shodhganga.inflibnet.ac.in /handle/10603/141443	Dr.R.KESAVAN	2015
  4	Mr. P. SHANMUGAVEL 2006219706	Experimental investigations on fatigue characteristics of aluminium ceramic composite materials. URL:https://shodhganga.inflibnet.ac.in /handle/10603/141623	Dr.G.B.BHASKAR	2015
  5	Mr. D. EASU 2007239176	A study on vibration isolation of single and two degree of freedom quarter car model with use of hybrid magnet and magnetorheological fluid damper. URL:https://shodhganga.inflibnet.ac.in /handle/10603/140346	Dr.A.SIDDHARTHAN	2015
  6	Mr. K. PAZHANIVEL 2011112005	Study on response characteristics of reinforced polymeric composites to different working environments. URL:https://shodhganga.inflibnet.ac.in /handle/10603/141366	Dr.G.B.BHASKAR	2015
  7	Mr.N. SEETHARAMAN 2915739716	Modelling analysis and simulation of trajectory generation for dual ARM mine detection mobile DMDM manipulator. URL:https://shodhganga.inflibnet.ac.in /handle/10603/141353	Dr.R.SIVARAMA KRISHNAN	2015
  8	Mr.A.RAMAMURTHY 2913239734	Performance analysis of wire electrodes on machining Ti 6AL 4V alloy using wire electrical discharge machining process. URL:https://shodhganga.inflibnet.ac.in /handle/10603/141426	Dr.R.SIVARAMA KRISHNAN	2016
  9	Mr.D. SARAVANAKUMAR 1115239722	Experimental investigation on accurate positioning of interconnected pneumatic cylinders system. URL:https://shodhganga.inflibnet.ac.in /handle/10603/196874	Dr.B.MOHAN	2016
  10	Mr. C. DHANDAPANI 2007239127	Modelling simulation kinematic analysis and synthesis of three degrees of freedom tri glide parallel manipulator. URL:https://shodhganga.inflibnet.ac.in /handle/10603/180842	Dr.R.SIVARAMA KRISHNAN	2016
  11	Mr.G.SHANMUGASUNDAR 2914239729	Modelling simulation and analysis of generic robot for inspection. URL:https://shodhganga.inflibnet.ac.in /handle/10603/232678	Dr.R.SIVARAMA KRISHNAN	2017
  12	Mr.P.SATHISH  1014239105	Investigation and prediction of mechanical and machining characteristics of banana kenaf epoxy hybrid composites. URL:https://shodhganga.inflibnet.ac.in /handle/10603/232177	Dr.R.KESAVAN	2017
  13	Mr. C.NANDAKUMAR 2912239704	Comparative study on machining of Ti alloys in CNC WEDM using online liquid nitrogen cooling. URL:https://shodhganga.inflibnet.ac.in /handle/10603/232629	Dr.B.MOHAN	2017
  14	Mr.P.SATHISH KUMAR  1217239798	Active vibration control of vehicle suspension system to improve passenger comfort. URL:https://shodhganga.inflibnet.ac.in /handle/10603/233726	Dr.J.JANCIRANI	2017
  15	Mr.P.SUBRAMANYA REDDY 1315239832	Some studies on mechanical and machining properties of an aluminium hybrid metal matrix composite. URL:https://shodhganga.inflibnet.ac.in /handle/10603/253207	Dr.R.KESAVAN	2018
  16	Mr.S.RAJESH  2011112035	Experimental investigation on the performance of composite leaf spring. URL:https://shodhganga.inflibnet.ac.in /jspui/handle/10603/234099	Dr.G.B.BHASKAR	2018
  17	Mr.K.POYYOTHAPPAN 2011172028	Experimental Study on Machining Characteristics of Glass Carbon Fibre Reinforced Hybrid Composites. URL:https://shodhganga.inflibnet.ac.in /handle/10603/260980	Dr.G.B.BHASKAR	2018
  18	Mr. SRIRANGARAJALU N 2914239703	Microstructure and mechanical behaviour of friction stir welded copper and its alloys. URL:https://shodhganga.inflibnet.ac.in /handle/10603/253332	Dr.A.RAJADURAI	2018
  19	Mr. KARUNAGARAN N  1014239740	Effect of surface treatment on mechanical properties of glassfibre stainless steel wire mesh reinforced epoxy hybrid composites. URL:https://shodhganga.inflibnet.ac.in /handle/10603/253040	Dr.A.RAJADURAI	2018
  20	Mr. KALIAPPAN, P 1414239865	Investigation of mechanical and machining behaviour of abaca neem hybrid natural fibre composites. URL:https://shodhganga.inflibnet.ac.in /handle/10603/344298	Dr.R.KESAVAN	2019
  21	Mr.P.SANTHANAMOORTHY 2011112002	Study on fine blanking of glass carbon hybrid polymeric composites. URL:https://shodhganga.inflibnet.ac.in /handle/10603/299892	Dr.G.B.BHASKAR	2019
  22	Mr.PATHALAMUTHU P 1314219153	Analysis of inhomogeneity of electrospun mat and its mitigation with the development of spirograph based collector a case study for wound dressing application. URL:https://shodhganga.inflibnet.ac.in /handle/10603/303649	Dr.A.SIDDHARTHAN	2019
  23	Mr. MUGENDIRAN V  2011112038	Studies on experimental and numerical analysis of incremental forming on AA5052 alloy. URL:https://shodhganga.inflibnet.ac.in /handle/10603/299497	Dr.A.GNANAVEL BABU	2019
  24	Mr.N.VASUDEVAN 2011172047	Effect of cryogenic treatment On mechanical and corrosion Behaviour of friction stir Welded aa5083 thick plates. URL:https://shodhganga.inflibnet.ac.in /handle/10603/334847	Dr.G.B.BHASKAR	2020
  25	Mr. SANGEET SAHAYA JEYENGAL 1414239861	Aerodynamic investigation into the underbody drag reduction of truck model by adapting active and passive flow control techniques. URL:https://shodhganga.inflibnet.ac.in /handle/10603/339666	Dr.J.JANCIRANI	2020
  26	Mr. MACHLINJAWAHAR,E    1514239263	Experimental and fe simulation studies on mechanical degradation of coatings in high temperature applications. URL:https://shodhganga.inflibnet.ac.in /handle/10603/342723	Dr.G.KUMARESAN	2020
  27	Mr. MANIKANDAN, T  1213219796	Studies on mechanical and dielectric properties of amine functionalized graphene oxide epoxy nanocomposites. URL:https://shodhganga.inflibnet.ac.in /handle/10603/343028	Dr.A.SIDDHARTHAN	2020
  28	Mr. NANTHAKUMAR,        A J D   1014239107	Design analysis development and experimental testing of a magnetorheological damping device. URL:https://shodhganga.inflibnet.ac.in /handle/10603/332161	Dr.J.JANCIRANI	2020
  29	Mr. SURESH KUMAR, J   1114239709	Experimental parametric analysis on al 6061 honeycomb core sandwich structure under flexural and low velocity impact test. URL:https://shodhganga.inflibnet.ac.in /handle/10603/334534	Dr.K.KALAICHELVAN	2020

   

• International / National Journals

  International / National  Journals

  1. Dhandapani, C & Sivaramakrishnan, R 2008, ‘Modelling, Simulation and analysis of three Degrees of freedom Triglide Parallel Manipulator’, Manufacturing Technology Today MTT, vol.7, Issue 8, pp. 3-8.
  2. Dhandapani, C & Sivaramakrishnan, R 2009, ‘Three Degrees of freedom Triglide Parallel Manipulator’, Invention Intelligence, vol.44, No.2, pp. 17-18.
  3. Natarajan, MP, Rajmohan, B & Devarajulu 2012, ‘Experimental Studies of Non- Asbestos Organic Brake Lining using Molybdenum Disulfide as Solid Lubricants’, European Journal of Scientific Research, vol.82, no.4, pp. 554-563.
  4. Natarajan, MP, Rajmohan, B & Devarajulu 2012, ‘Experimental Studies On Mechanical, Friction and Wear of Non- Asbestos Organic Brake Linings for Light Motor Vehicle’, International journal of Mechanical and Industrial Engineering, vol.2, Issue 2, pp. 74-82.
  5. Shanmugavel, P, Bhaskar, GB, Chandrasekaran, M, Mani, PS &Srinivasan, SP 2012, ‘An Overview of Fracture Analysis in Functionally Graded Materials’ European Journal of Scientific Research, vol. 68, no.3, pp. 412-439.
  6. Natarajan, MP & Rajmohan, B 2013, ‘Heat Dissipation and Temperature Distribution of Brake Liner Using Steady State Analysis’,Applied Mechanics and Materials, vols. 249-250, pp. 712-717.
  7. Chandrasekaran, R, Kesavan, R and Selvaraju, P 2013, “On Knowledge Based Factors: The Contribution of Successful Entrepreneurs in Manufacturing”, European Journal of Scientific Research, ISSN 1450-216X, vol. 94, no.1, pp.11-17.
  8. Easu, D & Siddharthan, A 2013, ‘Theoretical and Experimental Analysis of a Vibration Isolation System using Hybrid magnet’, Procedia Engineering, vol.64, pp. 1139-1146, (Elsevier Publications).
  9. Pazhanivel, K, Ramadoss, N, Poyyathappan, K, Anandan, P & Bhaskar, GB 2013, ‘Flexural analysis of GFRP composites Subjected to cyclic gradual load and cyclic impact’, Advanced Materials Research, vol. 685, pp. 35-39.
  10. Seetharaman, N, Sivaramakrishnan, R & Abin John Thomas 2013, ‘Geometry Based Recursive Algorithm To Control The End Effector Of Coordinated TRRLR Manipulators’, International Review of Mechanical Engineering (IREME), vol. 7, no. 5, July, pp. 807-812, ISSN 1970-8734.
  11. Saravanakumar, D & Mohan, B 2013, ‘Nonlinear mathematical modelling of servo pneumatic positioning system’, Applied Mechanics and Materials, vol. 313-314, pp. 962-966, ISSN: 16609336 (Annexure II).
  12. Shanmugasundar, G, Sivaramakrishnan, R, & Venugopal, S 2013, ‘Kinematic Analysis and Software Development of a Seven Degree of Freedom Inspection Robot’, World Academy of Science, Engineering and Technology, vol. 7, no. 4, pp. 270-277, ISSN: 2010376X, 20103778 (Annexure II) (Impact Factor: 0.133).
  13. Rajesh, S & Bhaskar, GB 2013, ‘Modelling and Experimental Analysis of Composite Leaf Spring’, International Journal of Mechanical Engineering and Manufacturing Sciences, vol. 6, no. 2, pp. 163-169.
  14. Santhana Moorthy, Bhaskar, GB, ‘Machining, analysis, characterization, and application of glass, carbon and glass-carbon hybrid composite- a review’ IJMEMS, July-December 2013. vol. 6, no. 3, pp.153-157.
  15. Ravinder, R, Kesavan, R & Tilagaraj, P 2014, ‘Assessment of air quality in commercial places of Chennai through Air Quality Index’, In Advanced Materials Research-ISSN: 10226680 (SCOPUS JOURNAL under Subject Area of Physical Sciences Listed in page No: 5 , Sl No:133 and Anna University Annexure-II, no.416, p.27-www. scietific.net.
  16. Ravinder, R, Kesavan, R, Gajendran, S & Tilagaraj, P 2014,‘A study on air pollution and its impact on health in Chennai city’, In Applied Mechanics and Materials (ISSN: 1660-9336) of Anna University Annexure-II-www.scietific.net
  17. Ravinder, R& Kesavan, R 2014, ‘Assessment of Air Quality in the City of Chennai’, Is accepted by the Editor-in-chief for the journal International Journal of Applied Environmental Sciences (IJAES)-of Anna University Annexure-II-RI Publications.
  18. Shanmugavel, P, Bhaskar, GB &Chandrasekaran, M 2014, ‘Experimental Study on Fatigue Characteristics for Aluminium and Al-SiC Composite Material Edge Crack Specimens under Flexural Loading Conditions,’ International Journal of Engineering and Technology, vol. 6, no. 1, pp. 13-27.
  19. Shanmugavel, P, Bhaskar, GB, Chandrasekaran, M &Srinivasan, SP 2014, ‘Determination of Stress Intensity Factors and Fatigue Characteristics for Aluminium, Aluminium-Alumina Composite Material and Aluminium-Alumina FGM Specimens with Edge Crack by Simulation,’International Journal of Applied Environmental Sciences, vol. 9, No. 4, pp. 1759-1768.
  20. Shanmugavel, P, Bhaskar, GB &Chandrasekaran, M 2014,‘Determination of Stress Intensity Factors and Fatigue Characteristics of Al-SiC Composite Material and Al-SiC Functionally Graded Material by Simulation,’ International Review of Mechanical Engineering, Vol. 8, No. 6, pp. 1017-1029
  21. Pazhanivel, K, Sabarish, R, Poyyathappan, K, Bhaskar, GB 2014, 'Impact analysis on stainless steel wires embedded GFRP composites', International Journal of Applied Environmental Sciences, vol. 9, no. 3, pp. 879-886.
  22. Pazhanivel, K, Bhaskar, GB & Elayaperumal, A 2014, ‘Significance of stainless steel wire reinforcement on the mechanical properties of GFRP composites’, International Journal of Engineering and Technology, vol.6, pp. 178-182.
  23. Seetharaman, N & Sivaramakrishnan, R 2014, ‘Fuzzy Control of Robotic Arms with Mine Detection GPR Sensor for Unmanned Mission Application on Undulated Terrain’, International Journal of Trend in Research and Development, vol. 2, no. 1, pp.1-12, ISSN 2394-9333 http://www.ijtrd.com.
  24. Saravanakumar, D, Mohan, B & Muthuramalingam, T 2014, ‘Application of response surface methodology on finding influencing parameters in servo pneumatic system’, Measurement, vol. 54, pp. 40-50, ISSN: 0263-2241 (Annexure I), Impact factor: 1.484.
  25. Saravanakumar, D & Mohan, B 2014, ‘Fuzzy based control system for interconnected pneumatic cylinder linear positioning system’, Applied Mechanics and Materials, vol. 592-594, pp. 2145-2149, ISSN: 16609336 (Annexure II).
  26. Mohan, B & Saravanakumar, D 2014, ‘Comparison of servo positioning performance of pneumatic cylinders using proportional valve method and PWM control method’, Applied Mechanics and Materials, vol. 541-542, pp. 1233-1237, ISSN: 16609336 (Annexure II).
  27. Saravanakumar, D, Mohan, B & Muthuramalingam, T 2014, ‘Optimization of proportional fuzzy controller for servo pneumatic positioning system using Taguchi: Data Envelopment Analysis based Ranking methodology’, Journal of Engineering and Technology, vol. 4, no. 2, pp. 115-118, ISSN: 0976 8580.
  28. Dhandapani, C & Sivaramakrishnan, R 2014, ‘Modelling, Simulation and Synthesis of three Degrees of freedom Triglide Parallel Manipulator for positioning and Orientation’, International Journal of Mechanical and Mechatronics Engineering IJMME-IJENS, vol.14, no. 2, pp. 66-76.
  29. Dhandapani, C & Sivaramakrishnan, R 2014, ‘Modelling, simulation and dimensional synthesis of three degrees of freedom Triglide parallel manipulator’, International Review of Mechanical Engineering (IREME), vol.8, no. 2, pp. 407- 416.
  30. Nandakumar, C & Mohan, B 2014, ‘Multi-Response Optimization of CNC WEDM Process Parameters for Machining Titanium alloy Ti- 6AI-4V using Response Surface Methodology (RSM)’, Applied Mechanics and Materials, vol. 541-542, pp. 354-358. ISSN: 1662-7482 (Annexure II) IF-0.11
  31. Nandakumar, C, Mohan, B & Srisathirapathy, S 2014, ‘Optimization of Process Parameters of Titanium alloy Grade 5 using CNC Wire-cut EDM’, Advanced Materials Research, vol. 984-985, pp. 56-61. ISSN: 1662-8985 (Annexure II) IF-0.31
  32. Sathishkumar, P, Jancirani, J & Dennie john 2014, ‘Reduction of axis acceleration of quarter car suspension using pneumatic actuator and active force control technique’, Journal of Vibro engineering, vol. 16, no. 3, Impact factor 0.66. (Annexure-I)
  33. Sathishkumar, P, Jancirani, J & John, D 2014, ‘Reducing the seat vibration of vehicle by semi active force control technique’, Journal of Mechanical Science and Technology (Springer) vol. 28, no. 2, pp. 473-479, Impact Factor 0.838.(Annexure-I)
  34. Rajesh, S & Bhaskar, GB 2014, ‘Response of Composite Leaf Springs to Low Velocity Impact Loading’, Applied Mechanics and Materials, vol. 591 no. 2, pp. 47-50.
  35. Rajesh, S, Nakkeeran, S & Bhaskar, GB 2014, ‘A survey of GFRP composite leaf spring, International Journal of Engineering & Technology’, vol. no. 2, pp. 185-193.
  36. Rajesh, S, Bhaskar, GB & Achudhan, M 2014, ‘Modeling and Analysis of Composite Leaf Springs’, International Journal of Applied Environmental Sciences, vol. 9 no. 3, pp. 847-852.
  37. Rajesh, S, Bhaskar, GB & Nakkeeran, S 2014, ‘Laminated Composites as the Material for the Replacement of Conventional Leaf Springs used in Light Commercial Vehicle’, International Journal of Applied Environmental Sciences, vol. 9 no. 3, pp. 831-836.
  38. Rajesh, S & Bhaskar, GB 2014, ‘Experimental Investigation on Laminated Composite Leaf springs Subjected to Cyclic Loading’, International Journal of Engineering and Technology, vol. 6, no. 1, pp. 95-101.
  39. Poyyathappan, K, Bhaskar, GB, Pazhanivel, K & Venkatesan, N 2014, ‘Tensile and Flexural Studies on Glass - Carbon Hybrid Composites Subjected to Low Frequency Cyclic Loading’, International Journal of Engineering and Technology (IJET), vol. 6, no. 1.
  40. Poyyathappan, K, Bhaskar, GB, Venkatesan, N, Pazhanivel, K & Saravanan, G 2014, ‘Dynamic Mechanical and Flexural Characteristics of Glass-Carbon Hybrid Composites’, Applied Mechanics and Materials, vol. 591, pp. 72-76.
  41. Venkatesan, N, Bhaskar, GB, Pazhanivel, K & Poyyathappan, K 2014, ‘Reinforcing Effect of Montmorillonite Nanoclay on Mechanical Properties of High Density Polyethylene Nanocomposites’, Applied Mechanics and Materials, vol. 591, pp. 60-63.
  42. Poyyathappan, K, Manavalan, S, Bhaskar, GB & Pazhanivel, K 2014, ‘Assessment of Vital Mechanical Properties on Glass-Carbon Hybrid Composites Subjected to Low Frequency Point Loading’, International Journal of Applied Environmental Sciences, vol. 9, no. 3, pp. 887–893.
  43. Srirangarajalu, N, Madhusudhan Reddy, G, Koteswara Rao, SR & Rajadurai, A 2014, ‘Microstructure and Mechanical Behaviour of Friction Stir Welded Brass’, International Journal of Applied Environmental Sciences (IJAES),vol.9, no. 2, pp. 165-172.(Annexure- II)
  44. Pathalamuthu, P, Siddharthan, A & Giridev, VR 2014, „Spirograph based mechanical assembly for fabrication testing and measurement of product with near uniform characteristics‟, Indian Patent Application Number 5603/CHE/2014.
  45. Easu D, Amrutha, R & Siddharthan, A 2015, ‘Experimental study on Quarter Car Model using the combination of MR fluid damper and Hybrid Magnet’, International Journal of Applied Engineering Research ,vol.10,No.8.pp 6363-6366
  46. Pazhanivel, K, Bhaskar, GB, Elayaperumal, A, Anandan, P & Arunachalam, S 2015, ‘Influence of stainless steel wire reinforcement on the impact resistance of GFRP composite laminates’, Arabian Journal for Science and Engineering, vol. 40, pp. 1111-1122.
  47. Seetharaman, N & Sivaramakrishnan, R 2015, ‘Joint Control of a TRRLR Mobile Manipulator for Unstructured Terrain’, International Journal of Applied Engineering Research, vol. 10, no.3, pp.7673-7686, ISSN 0973-4562.
  48. Ramamurthy, A, Sivaramakrishnan, R & Muthuramalingam, T 2015, ‘Taguchi-Grey Computation Methodology for Optimum Multiple Performance Measures on machining on titanium alloy in WEDM process’, Indian Journal of Engineering and Material Science, vol. 22, pp. 181-186, ISSN: 0971-488, Impact Factor: 0.641.
  49. Ramamurthy, A, Sivaramakrishnan, R, Venugopal, S & Muthuramalingam, T 2015, ‘Application of taguchi-grey relational methodology for multiple optimal performance in WEDM process’, Applied Mechanics and Materials, vol. 766-767, pp. 861-866, ISSN:16609336 (Annexure II).
  50. Ramamurthy, A, Sivaramakrishnan, R, Venugopal, S & Muthuramalingam, T 2015, ‘Multi-Response optimization of wireEDM process parameters on Titanium Alloy using Taguchi method and Grey Relational Analysis, Applied Mechanics and Materials, vol. 772, pp. 245-249, ISSN: 16609336 (Annexure II).
  51. Saravanakumar, D, Mohan, B & Muthuramalingam, T 2015, ‘A study on influence of system parameters on servo pneumatic system and multi-response optimization using Taguchi – Grey methodology’, Applied Mechanics and Materials, vol. 789-790, pp. 899-903, ISSN: 16609336 (Annexure II).
  52. Saravanakumar, D & Mohan, B 2015, ‘Identification of frictional parameters in pneumatic cylinders using a combined real-time and simulation environment’, International Journal of Mechanical Handling and Automation, vol. 1, no.1, pp. 8-13.
  53. Shanmugasundar, G & Sivaramakrishnan, R 2015, ‘Computer Aided Stress and Deflection Analysis of Inspection Robot at Different Postures’, Applied Mechanics and Materials, vols. 813-814, pp. 1052-1057, ISSN: 16609336 (Annexure II) (Impact Factor: 0.113).
  54. Shanmugasundar, G, Sivaramakrishnan, R, Sridhar, R & Rajmohan, M 2015, ‘Computer Aided Modelling and Static Analysis of an Inspection Robot’, Applied Mechanics and Materials, vol. 766, pp. 1055-1060. ISSN: 16609336 (Annexure II) (Impact Factor: 0.113).
  55. Shanmugasundar, G, Rajmohan, M, & Sivaramakrishnan, R 2015, ‘Computer Aided Modelling and Design of Mechanical Configuration of an Inspection Robot’, Applied Mechanics and Materials, vol. 766, pp. 1015-1020, ISSN: 16609336 (Annexure II) (Impact Factor: 0.113).
  56. Sathish, P, Kesavan, R, Vijaya Ramnath, B, Vishal, C 2015, ‘Effect of Fiber Orientation and Stacking Sequence on Mechanical and Thermal Characteristics of Banana-Kenaf Hybrid Epoxy Composite’, Silicon Journal, vol. 9, no. 4, pp. 577-585, ISSN : 1876-990X
  57. Sathish, P, Kesavan, R & Vijaya Ramnath, B 2015, ‘Experimental Investigation of Flexural Property of Abaca and Raffia hybrid composites’, ARPN Journal of Engineering and Applied Sciences, vol. 10, no. 13, pp. 5534-5536, ISSN: 1819-6608.
  58. Sathish, P, Kesavan, R & Vijaya Ramnath, B 2015, ‘Experimental Investigation on Delamination Behaviour of Abaca based hybrid composites’, ARPN Journal of Engineering and Applied Sciences, vol. 10, no. 13, pp. 5548-5550, ISSN: 1819-6608.
  59. Sathish, P & Kesavan, R 2015, ‘Banana Fiber Reinforced composites – A Review’, International Journal of Advanced Research in Science, Engineering and Technology, vol. 2, no. 6, pp. 872-874, ISSN:2350- 0328.
  60. Nandakumar, C, Mohan, B, Senthilkumar, C & Vickram, K 2015, ‘Modeling and Optimization of WEDM of Titanium’, Applied Mechanics and Materials, vol. 766-767, pp. 873-877 ISSN: 1662-7482 (Annexure II) IF-0.16
  61. Nandakumar, C, Karikalan, S & Mohan, B 2015, ‘Effect of Material Removal Rate on Titanium in CNC-WEDM using RSM’, Journal of Chemical and Pharmaceutical Sciences, Special issue 5, pp. 96-100. ISSN: 0974-2115 (Annexure II) IF-0.68
  62. Nandakumar, C, Vickram, K & Mohan, B 2015, ‘Effect of Surface Roughness on Titanium in CNC-WEDM using RSM’, Journal of Chemical and Pharmaceutical Sciences, Special issue 7, pp. 101-105. ISSN: 0974-2115 (Annexure II) IF-0.68
  63. Jancirani, J, Sathishkumar, P, Manar Eltantawie & Dennie John 2015, ‘Comparison of Air spring actuator and Electro-hydraulic actuator in Suspension system’, International Journal of Vehicle Structures and Systems, vol. 7, no. 1, pp.36-39, (Annexure-II)
  64. Sathishkumar, P, Jancirani, J, Dennie John & Arun, B 2015, ‘Simulation of Electrical Actuator and Air Spring Actuator Controlled Suspension Systems for Automotive Vehicles’, Int. J. Vehicle Structures & Systems, vol. 7, no. 3, pp.123-127. (Annexure-II)
  65. Rajesh, S, Bhaskar, GB, Sekar, CB & Muthamizhselvan, V 2015, ‘Optimization of composite leaf spring using Taguchi techniques’, International Journal of Applied Engineering Research, vol. 10 no. 42, pp. 30941-30946.
  66. Santhanamoorthy, ShivaSwabnil, S, & Bhaskar, GB 2015, ‘Study On Drilling Characteristics of Glass Carbon Hybrid Composite Laminates ‘International Journal of Applied Engineering Research, ISSN 0973- 4562, vol. 10, no. 42.
  67. Pathalamuthu, P, Siddharthan, A & Giridev, VR 2015, „Enhancement and investigation of mechanical property of electrospun mat prepared using CDC‟, International Journal of Applied Engineering and Research, vol. 10, no. 8, pp. 6320-6325. (ISSN: 0973-4562, Impact Factor: 0.14, Annexure II)
  68. Jancirani, J, Nanthakumar, AJD & Niketh, P 2015, ‘Optimal current value estimation for an automotive Magneto Rheological (MR) fluid damper actuation’, Applied Mechanics and Materials, Vol. 812, no.1, pp. 93-101, ISSN: 1662-7482. (Annexure II).
  69. Shanmugasundar, G & Sivaramakrishnan, R 2016, ‘Design and Analysis of a newly developed Seven Degree of Freedom Robot for Inspection’, International Journal of Control Theory and Applications, vol. 9, no. 24, pp. 393-402, ISSN: 0974-5572. (Annexure II) (Impact Factor: 0.53).
  70. Rajesh, S, Bhaskar, GB, Venkatachalam, J, Pazhanivel, K & Suresh Sagadevan 2016, ‘Performance of leaf springs made of composite material subjected to low frequency impact loading’, Journal of Mechanical Science and Technology, vol. 30, no. 9, pp. 4291-4298, (Annexure I, Impact Factor: 1.128).
  71. Srirangarajalu, N & Rajadurai, A 2016, ‘Microstructure and Mechanical Behaviour of Friction Stir Welded ETP Copper’, International Journal La Metallurgia Italiana, published on Feb’2016. no. 2, pp.13-20. (Annexure-I), Impact Factor: 0.298.
  72. Karunagaran, N & Rajadurai, A 2016, ‘Effect of surface treatment on mechanical properties of glass fibre/stainless steel wire mesh reinforced epoxy hybrid composites’, Journal of Mechanical Science and Technology, vol. 30, no. 6, pp. 2475-2482.( Impact Factor-1.09 )
  73. Shanmugasundar, G & Sivaramakrishnan, R 2017, ‘Analytical and software method of Workspace Analysis for a Seven Degrees of Freedom Inspection Robot’, International Journal of Control Theory and Applications, vol. 10, no. 11, pp. 19-28, ISSN: 0974-5572. (Annexure II) (Impact Factor: 0.53).
  74. Sathish, P, Kesavan, R & Mahaviradhan, N 2017, ‘Coconut Fiber Reinforced Composites – A Review’, International Journal for Research in Applied Science and Engineering Technology, vol. 5, no. 3, pp. 171-172, ISSN:2321-9653.
  75. Sathish, P, Kesavan, R & Mahaviradhan, N 2017, ‘Hemp Fiber Reinforced Composites – A Review’, International Journal for Research in Applied Science and Engineering Technology, vol. 5, no. 3, pp. 594-595, ISSN:2321-9653.
  76. Subramanya Reddy, P, Kesavan, R & Vijaya Ramnath, B 2017, ‘Investigation of Mechanical Properties of Aluminium 6061-Silicon Carbide, Boron Carbide Metal Matrix Composite’, International Journal, Silicon, DOI 10.1007/s12633-016-9479-8, (Annexure I, Impact Factor 0.83).
  77. Rajesh, S, Bhaskar, GB, Subash, R, Pazhanivel, K & Suresh Sagadevan 2017, ‘Optimization of leaf spring design using response surface methodology’, Romanian Journal of Materials, vol. 47, pp. 98-105. (Annexure I, Impact Factor: 0.560).
  78. Srirangarajalu, N & Rajadurai, 2017, ‘Hardness and tensile behaviour of friction stir welded Cu-40wt%Zn brass,’ ‘Indian Journal of Engineering & Materials Sciences,’ vol.24, pp.63-68. (Annexure –I) Impact Factor: 0.485.
  79. Kaliappan, P, Kesavan, R & Vijaya Ramnath, B 2017, ‘Investigation of effect of fibre hybridization and orientation on mechanical behaviour of natural fibre epoxy composite’, Bulletin of Material Science, vol. 40, no. 4, pp. 773-782 (Annexure 1, Impact Factor: 0.925).
  80. Pathalamuthu, P, Thameem Shahana, S, Nivedha, U, Siddharthan, A & Giridev, VR 2017, „Analysis of inhomogeneity of electrospun mat, produced using static and dynamic collectors of different template design, including its mitigation‟, Fibres & Textiles in Eastern Europe, vol. 123, no. 3, pp. 53-61. (ISSN: 1230-3666, Impact Factor: 0.63, Annexure I)
  81. Mugendiran, V & Gnanavelbabu, A 2017, ‘Comparison of plastic strains on AA5052 by single point incremental forming process using digital image processing’, Journal of Mechanical Science and Technology, vol. 31, no. 6, pp. 2943-2949, (Impact Factor 1.128).
  82. Suresh Kumar, J & Kalaichelvan, K 2017, ‘Taguchi Grey Multi Response Optimization on Structural Parameters on Honeycomb Core Sandwich Structure’, Silicon , vol. 10, pp. 879-889.
  83. Poyyathappan, K, Bhaskar, GB, Pazhanivel, KS, Rajesh & Suresh Sagadevan 2018, ‘Mechanical and Microstructural Characteristics of the Glass – Carbon Fiberous Composite Materials’, TAGA Journal, vol. 14, pp. 2684- 2696 (Annexure – I, Impact Factor: 0.101)
  84. Santhana Moorthy, Bhaskar, GB, Vijaya Ramanath &Gowri.S 2018, ‘Mechanical properties and microstructure of glass carbon Hybrid Composite’, DOI 10.3139 material testing vol. 60, no.11, pp.1131-1137. (Annexure I)
  85. Pathalamuthu, P, Siddharthan, A & Giridev, VR 2018, „Spirograph based electrospinning system: A novel method of producing fibre mat with near uniform mechanical property‟, Indian Journal of Fibre & Textile Research, Accepted. (ISSN: 0971-0426, Impact Factor: 0.43, Annexure I)
  86. Mugendiran, V & Gnanavelbabu, A 2018, ‘Analysis of formability and twist angle in AA5052 alloy by single point incremental forming process’, Indian Journal of Engineering and Materials Sciences, vol. 25, pp. 163-168, (Impact Factor: 0.543).
  87. Neelamegam Vasudevan, Govindasamy Bhavani Bhaskar, Tadivaka Srinivasa Rao, Muthukrishnan Mohandass, 2019 ‘Mechanical properties of cryogenically treated AA5083 friction stir welds’, Published in Materials Testing, ISSN: 0025-5300, Article DOI: 10.3139 / 120.111430, vol. 61, issue 12-2019 (Annexure I, Impact Factor: 0.573).
  88. Sangeet Sahaya Jeyangel, A & Jancirani, J 2019, ‘Experimental Investigation and ANN Prediction on the Underbody Drag Minimization in Truck Model using DC Pulsed DBD Plasma Actuator as an Active Flow Control Device’, Journal of Applied Fluid Mechanics, vol. 12, no. 1, pp. 195–205, (Annexure I, Impact Factor 1.09).
  89. Manikandan, T., Siddharthan, A., Murugananthan, R. and Sugumaran, C.P., 2019. ‗Influence of Amine-functionalised graphene oxide filler on mechanical and insulating property of epoxy nanocomposites‘. Materials Research Express, vol. 6, no. 9, pp. 1-16, Impact Factor: 1.449.
  90. Nanthakumar, AJD, Jancirani, J, Rajasekaran, SC & Sarathkumar, K 2019, ‘Multiphysics Analysis of a Magnetorheological Damper’, Defence Science Journal, Vol.69, no.3, pp. 230-235, ISSN: 0011-748X (Annexure I, Impact Factor:0.51).
  91. Nanthakumar, AJD & Jancirani, J 2019, ‘Design optimization of magnetorheological damper geometry using response surface method for achieving maximum yield stress’, Journal of Mechanical Science and Technology, Vol.33, no.9, pp. 4319-4329, ISSN: 1738-494X (Annexure I, Impact Factor: 1.194).
  92. Kumaresan, G, Machlin Jawahar, E & Senthil Kumar, P 2019, ‘TiN and TiCN Coated Stainless Steel 316 Ultrosonic Cavitation Probe for High Temperature Application’, Silicon, Vol-11, Is-2, pp.713-719.
  93. Manikandan, T., Siddharthan A, Murugananthan R. and Pugazhendhi Sugumaran C, Feb. 2020 ―Heat tolerant epoxy-amine functionalized Graphene oxide composites for insulation applications‖ Journal of Adhesion Science & Technology, Taylor & Francis, Impact Factor: 1.258.
  94. Shanmugavel, P, Bhaskar, GB &Chandrasekaran, M ‘Evaluation of Stress Intensity Factors and Fatigue Characteristics for Al-TiO2 Composite Material Experimentally and Al- TiO2 Functionally Graded Material by Simulation,’ International Journal for Materials Research. Under Review.
  95. Pazhanivel, K, Bhaskar, GB, Elayaperumal, A, Anandan, P & Arunachalam, S, ‘Experimental investigation on flexural response of GFRP composites embedded with Ni-Ti SMA reinforcements, Journal of the Brazilian Society for Mechanical Engineering and Sciences (under review).
  96. Pazhanivel, K, Bhaskar, GB, Elayaperumal, A, Anandan, P & Arunachalam, S 2015, ‘Influence of SMA reinforcement on the impact resistance of GFRP composite laminates under different temperatures’, Journal of Materials Science (under review).
  97. Ramamurthy, A, Sivaramakrishnan, R, Vengopal, S & Muthuramalingam, T, ‘Performance Analysis of Wire Electrodes On Machining Ti-6Al-4V Alloy Using Electrical Discharge Machining Process’, Machining Science and Technology (in press (Annexure I), Impact Factor: 0.703.
  98. Ramamurthy, A, Sivaramakrishnan, R, Vengopal, S & Muthuramalingam, T, ‘Influence of wire electrode coating on surface structural and morphological studies of Titanium (Ti-6Al-4V) alloy using wire electrical discharge machining’, International Journal of Advanced Manufacturing and Technology (under review).
  99. Saravanakumar, D & Mohan, B, ‘Servo pneumatic positioning system: A state of the art review’, Achieves of Civil and Mechanical Engineering (Under Review).
  100. Saravanakumar, D & Mohan, B, ‘Multi-response optimization and study on influence of system parameters on positioning performance of interconnected pneumatic cylinders system’, Measurement (Under Review).
  101. Neelamegam Vasudevan, Govindasamy Bhavani Bhaskar, Muthukrishnan Mohandass, Tadivaka Srinivasa Rao, ‘Investigation On Corrosion Behavior of Cryogenically Treated Friction Stir Welded AA5083’, Mechanika, ISSN 1392 1207. Accepted for Publication. (Annexure I, Impact Factor: 0.500).

   

• International / National Conference

   International / National Conference

  1. Shanmugavel, P, Elayaperumal, A &Kari Thangaratnam 2009,‘Fracture Analysis in Functionally Graded Materials,’ Proceedings of International Conference on Advances in Mechanical and Building Sciences (ICAMP-2009), 14-16 December 2009, VIT University, Vellore, Tamilnadu, India, vol. 1, pp. 1103-1112.
  2. Seetharaman, N 2010, ‘Position Control of DC Motor using BFOA’, International Conference on System Dynamics and Control –ICSDC 19th -22nd August.
  3. Ramamurthy, A, Sivaramakrishnan, R & Venugopal, S 2010, ‘Optimization of wire electrical Discharge Machining process parameters using Taguchi method’, Proceedings of Recent Innovations in Production Engineering.
  4. Natarajan, MP & Rajmohan, B 2011, ‘Studies on Mechanical, Friction and Wear of Non- Asbestos Organic brake linings’, Proceedings of first national conference on Advancement & Recent Innovations in Mechanical Engineering, Chennai, pp.65-69.
  5. Natarajan, MP & Rajmohan, B 2011, ‘Effect of Ingredients on Mechanical and Tribological Characteristics of different brake liner material’, Proceedings of first international conference on Advanced Materials and Processing, Chennai, pp.132-141.
  6. Seetharaman, N & Sivaramakrishnan, R 2011, ‘Precise Control of Robotic arm for uneven dynamic environment’, 3rd International Conference on Science, Engineering and Technology (SET) November 17-18.
  7. Srirangarajalu, N, Madhusudhan Reddy, G, Koteswara Rao, SR &Rajadurai, A 2011, ‘Friction Stir Welding of Copper and its alloys’,Joint International Conference on Advanced Materials -2011, ICAME,19th- 20th August 2011,BTL Institute of Technology, Bangalore, PJIC_122.
  8. Chandrasekaran, R, Kesavan, R and Selvaraju, P 2012, ‘An Analytical Study on the Success of Entrepreneurs in the City of Chennai, Tamil Nadu, India’, Presented a paper in the International Conference. Organized by ICICIC Global - Springer in Chennai in the month ofDec’2012.
  9. Saravanakumar, D & Mohan, B 2012, ‘Simulation study of servo control of pneumatic positioning system using fuzzy PD controller’, Proceedings of International Conference on Emerging Trends in Science, Engineering and Technology, J J College of Engineering, pp. 409-418.
  10. Saravanakumar, D & Mohan, B 2012, ‘Trajectory tracking characteristics of PWM controlled servo pneumatic positioning system using fuzzy controller’, Proceedings of 5th International Conference on Science, Engineering and Technology, VIT University, pp. 202-207.
  11. Saravanakumar, D & Mohan B 2012, ‘Mathematical modelling and simulation of servo pneumatic positioning system’, Proceedings of International Conference on Advances in Construction, Manufacturing and Automation Research, Kongu Engineering college, pp. 1-7.
  12. Dhandapani, C 2012, ‘An approach for automatic orientation and positioning of aero-plane models using three degrees of freedom triglide parallel manipulator for wind tunnel testing’, in Proc. ICFTME 2012. National Aeronautical Laboratory, Bangalore.
  13. Srirangarajalu, N, Madhusudhan Reddy, G, Koteswara Rao, SR &Rajadurai, A 2012, ‘Microstructure and Mechanical Behaviour of Friction Stir Welded Copper’,1stInternational Conference on Intelligent Robotics, Automation and Manufacturing, IRAM 2012, Kuala Lumpur, Malaysia, 28 Nov. to 30November 2012, Code 94343: vol. 330 CCIS, 2012, pp. 458-465, Springer and Scopus Indexed.
  14. Srirangarajalu, N, Madhusudhan Reddy, G, Koteswara Rao, SR &Rajadurai, A 2012, ‘Friction Stir Welding of Copper and its Alloys using Different Tool Pin Profiles’, 2nd International Conference on Advances in Engineering and Technology (ICAET2012).
  15. Chandrasekaran, R, Kesavan, R and Selvaraju, P 2013,‘On Finance Based Factors: The Contribution of Successful Entrepreneurs in Manufacturing’, ISBN: 978-1-4673-4948-2 © 2013 IEEE, IEEE - International Conference on Research and Development Prospectus on Engineering and Technology (ICRDPET 2013) March 29,30, 2013 vol.1.
  16. Shanmugavel, P, Bhaskar, GB &Chandrasekaran, M 2013,‘Determination of Stress Intensity Factors and Fatigue Characteristics for Al-TiO2 Composite Material Experimentally and Al-TiO2 Functionally Graded Material by Simulation,’ Proceedings of International Conference on Engineering Materials and Processes (ICEMAP-2013), 23-24 May 2013, Chennai, India, vol. 1, pp. 485-493.
  17. Easu, D, Amrutha, R & Siddharthan, A 2013, ‘Performance of MR fluid damper using Ferrous nano particles’, International Conference on Nano Materials for Frontier Applications and Indo- Norwegian Workshop on Advanced Materials for Solar Cell Applications”, Coimbatore Institute of Technology,Coimbatore,10-12 July.
  18. Easu, D, Amrutha, R, Andal, G & Siddharthan, A 2013, ‘Influence of size of Iron powder on damping characteristics of Magneto Rheological Fluid’, Indian Engineering Congress, Institution of Engineers IEC2013,Chennai, 20 -21, December.
  19. Saravanakumar, D & Mohan, B 2013, ‘Optimization of size parameters for interconnected pneumatic cylinders positioning system’, Proceedings of the 1st International and 16th National Conference on Machines and Mechanisms, IIT Roorkee, pp. 636-640.
  20. Saravanakumar, D & Mohan, B 2013, ‘Modelling and simulation of PWM controlled servo pneumatic positioning system using fuzzy controller’, Proceedings of First International Conference on Instrumentation, Communication, Control and Automation, Kalasalingam University, pp. 246-251.
  21. Saravanakumar, D & Mohan B 2013, ‘Performance comparison of interconnected pneumatic cylinders servo positioning system’, Proceedings of Indian Conference on Applied Mechanics, IIT Madras, pp. 521-526.
  22. Saravanakumar, D & Mohan, B 2013, ‘Parameter selection analysis for servo pneumatic positioning system’, Proceedings of National Conference on Emerging Trends in Mechanical Engineering, Aksheeya College of Engineering, pp. 222-225.
  23. Srirangarajalu, N, Madhusudhan Reddy, G, Koteswara Rao, SR & Rajadurai, A 2013, ‘Microstructure and Mechanical Behaviour of Friction Stir Welded Brass’, International Conference on Engineering Materials and Processes, ICEMAP 2013,Tagore Engineering College, Chennai on 23rd and 24th May 2013.
  24. Nanthakumar, AJD & Jancirani, J 2013, ‘Mathematical Modeling of MR Dampers Based on Fluid Dynamic Principles – A Review’, Indian Conference on Applied Mechanics (INCAM) 2013, IIT Madras, 4 – 6 July.
  25. Suresh Kumar, J & Kalaichelvan, K 2013, ‘Flexural and Impact Behavior of Honeycomb Structures for Out-of-plane Loading’, Indian Conference on Applied Mechanics (INCAM), pp.1-5.
  26. Ravinder, R 2014, ‘Assessment of air quality incommercial places of Chennai through Air Quality Index’, At International Conference on Recent Advances in Mechanical Engineering and Interdisciplinary Developments (ICRAMID-2014) at Ponjesley College of Engineering, Nagercoil - 629 003 on 7th and 8th March 2014.
  27. Ravinder, R 2014 ‘A study on air pollution and its impact on health in Chennai city’,International conference on Modeling Optimization and Computing -(ICMOC-2014), at Noorul Islam center for Higher education, Nagercoil - 629 180 on 10th and 11th April 2014.
  28. Easu, D, Amrutha, R, Linu Sam & Siddharthan, A 2014, ‘A comparison of the performance MR Fluid Damper using Nano and Micro Ferrous Particles”, International conference on Advances in New materials-ICAN 2014,University of Madras, Chennai, 20 -22, June 2014
  29. Ramamurthy, A, Sivaramakrishnan, R, Venugopal, S & Muthuramalingam, T 2014, ‘Multi-Response optimization of wireEDM process parameters on Titanium Alloy using taguchi method and grey relational Analysis’, Proceedings of International Conference on Mechanical, Manufacturing and Control, pp. 245-249.
  30. Ramamurthy, A, Sivaramakrishnan, R, Vengopal, S & Muthuramalingam, T 2014, ‘Application of Taguchi-grey relational methodology for multiple optimal performance in WEDM process’, Proceedings of International Conference on Advances in Materials and Manufacturing Engineering, pp. 861-866.
  31. Saravanakumar, D & Mohan, B 2014, ‘Comparison of servo tracking capability of the interconnected cylinders positioning system with servo pneumatic positioning system’, Proceedings of 5th International & 26th All India Manufacturing Technology, Design and Research Conference, IIT Guwahati, pp. 60:1-6.
  32. Saravanakumar, D, Mohan, B & Muthuramalingam, T 2014, ‘A study on influence of system parameters on servo pneumatic system and multi-response optimization using Taguchi – Grey methodology’, Proceedings of the International Conference on Mechanical, Manufacturing and Control, Singapore, pp. 42:1-5.
  33. Saravanakumar, D & Mohan, B 2014, ‘Fuzzy based control system for interconnected pneumatic cylinder linear positioning system’, Proceedings of International Mechanical Engineering Congress, NIT Trichy, pp. 2145-2149.
  34. Mohan, B & Saravanakumar, D 2014, ‘Comparison of servo positioning performance of pneumatic cylinders using proportional valve method and PWM control method’, Proceedings of International Conference on Mechatronics, Manufacturing and Automation, Singapore, pp. 1233-1237.
  35. Pathalamuthu, P, Siddharthan, A & Giridev, VR 2014, „Enhancement of mechanical property of electrospun mat prepared using constrained collector‟, International Conference on Modeling, Optimization and Computing (ICMOC 2014) Noorul Islam University. Kumaracoil- 629180, Tamilnadu, India, April 10-11, 2014.
  36. Mugendiran, V, Gnanavelbabu, A & Ramadoss, R 2014, ‘Parameters optimization for surface roughness and wall thickness on AA5052 Aluminium alloy by incremental forming using response surface methodology’, 12th Global Congress on Manufacturing and Management GCMM 2014, pp. 1991-2000.
  37. Mugendiran, V & Gnanavelbabu, A 2014, ‘Comparison of FLD and thickness distribution on AA5052 aluminium alloy formed parts by incremental forming processes’, 12th Global Congress on Manufacturing and Management (GCMM 2014), pp. 1983-1990.
  38. Mugendiran, V, Gnanavelbabu, A & Ramadoss, R 2014, ‘Tensile Behaviour of Al5052 Alloy Sheets Annealed at Different Temperatures’, Materials Industrial, and Manufacturing Engineering Research Advances, pp. 431-435.
  39. Mohan, B & Saravanakumar, D 2015, ‘Energy efficiency analysis of interconnected pneumatic cylinders servo positioning system’, Proceedings of the AMSE 2015 International Mechanical Engineering Congress & Exposition, pp. V04AT04A034.
  40. Saravanakumar, D & Mohan B 2015, ‘Identification of friction parameters in pneumatic cylinders using a combined real-time and simulation environment’, Proceedings of National Conference on Mechatronics – Technologies and Future Challenges, SRM University, pp. 20-23.
  41. Srirangarajalu, N, 2015, ‘Experimental Investigation on Friction Stir Welded Aluminium – Silicon Alloy’, 3rd International Conference on the Advancements of Science and Technology, (ICAST-2015), 8th – 9th May 2015.pp 109-115. Bahir Dar Institute of Technology, Bahir Dar University, Bahir Dar, Ethiopia
  42. Nanthakumar, AJD & Jancirani, J 2015, ‘Simulation of Magnetorheological fluid flow in an annular duct’, International Conference on Innovative Research in Engineering & Technology, Park College of Engineering & Technology, Coimbatore, 09 - 11, April.
  43. Suresh Kumar, J & Kalaichelvan, K 2015, ‘Influence of Honeycomb Cell Size, Cell Wall Thickness and Core Thickness on Low Velocity Impact Behavior of Aluminum Honeycomb Core Sandwich Structure for Out-of-Plane Loading’, proceedings of 6th International Conference on Advancements in Polymeric Materials (APM), pp. 1-6.
  44. Subramanya Reddy, P, Kesavan, R & Vijaya Ramnath, B 2016, ‘Flexural Behavior of Aluminium Metal Matrix Composite’, International conference ICETER’16 organised by School of Engineering, Vels University, Chennai.
  45. Subramanya Reddy, P, Kesavan, R & Vijaya Ramnath, B 2016, ‘Investigation of Tensive Behavior of Aluminium Alloy (Al2024) Reinforced with Silicon carbide(SiC) Metal Matrix Composite’, International conferance ICETER’16 organised by School of Engineering, Vels University, Chennai.
  46. Senthil Kumar R, Subramanya Reddy, P, Kesavan, R , Vijaya Ramnath, B 2016, ‘Determination of mechanical behaviour of fly ash based aluminium metal matrix composites’, International conference ICMMMS’16 organised by Sri sairam engineering college, chennai-44.
  47. Senthil Kumar R, Subramanya Reddy, P, Kesavan, R , Vijaya Ramnath, B 2016, ‘Investigation of mechanical properties of sawdust reinforced epoxy composites’, International conference ICMMMS’16 organised by Sri sairam engineering college, chennai-44.
  48. Srirangarajalu, N, 2016, ‘A Review of Friction Stir Welded Copper’, 4th International Conference on the Advancements of Science and Technology, (ICAST-2016), 17th &18th June 2016.pp 48-56. Bahir Dar Institute of Technology, Bahir Dar University, Bahir Dar, Ethiopia
  49. Karunagaran, N, Rajadurai, A & Saravanan, R 2016, ‘Influence of surface modification on tensile behavior of glass fibre/Stainless steel wire mesh reinforced hybrid composites’, International Conference on Materials, Design and Manufacturing Process, (ICMDM ’16), College of Engineering, Guindy, Anna University, Chennai, pp. 521-526.
  50. Nanthakumar, AJD & Jancirani, J 2016, ‘Electromagnetic analysis of an automotive Magnetorheological damper’, National Conference on Contemporary Research in Advanced Material Science, Karpaga Vinayaga Engineering College, 04 - 05, February.
  51. Subramanya Reddy, P, Kesavan, R, Vijaya Ramnath, B& Jeykrishnan, J 2017, ‘Application of Fuzzy Grey Relational Analysis for Process Parameter Optimization of EDM on Aluminum Metal Matrix Composites’, 2nd International Conference on Mechanical and Manufacturing Engineering (ICMME-2017), SCSVMV University, Kanchepuram.
  52. Karunagaran, N & Rajadurai, A 2017, ‘Interlaminar shear behavior of surface modified glass fibre/Stainless steel wire mesh reinforced hybrid composites’, International Conference on Design and Advances in Mechanical Engineering’, (ICDAME’17), S.K.P Engineering College, Tiruvannamalai.
  53. Mugendiran, V & Gnanavelbabu, A 2017, ‘Analysis of hole flanging on AA5052 alloy by single point incremental forming process’, International Conference on emerging trends in Materials and Manufacturing Engineering (IMME17), National Institute of Technology, Tiruchirapalli.
  54. Nanthakumar, AJD & Jancirani, J 2017, ‘Fluid flow analysis of a magnetorheological damper under varying flux conditions’, National Conference on Advances in Materials and Manufacturing Techniques, SRM University, 24-25 March.
  55. Nanthakumar, AJD & Jancirani, J 2017, ‘CFD analysis of magnetorheological fluid flow in an automotive damper’, National Conference on Modernisation, Dynamization, Mechanisation and Structuralisation, Veltech Engineering College, 20th January.
  56. Suresh Kumar, J & Kalaichelvan, K 2017, ‘An Experimental Study on Multi Response Behaviour on Alumiminium Honeycomb Core Sandwich Structure For Flexural Test’, Proceedings of 10th International Conference on Precision, Meso, Micro and Nano Engineering (COPEN 10), ISBN: 9789380689289, pp.528-531.
  57. Suresh Kumar, J & Kalaichelvan, K 2017, ‘Taguchi Grey Multi Response Optimization On Structural Parameters On Honeycomb Core Sandwich Structure for Low Velocity Impact Test’, proceedings of International Conference on Design and Manufacturing (ICONDM), pp. 1-5.
  58. Nanthakumar, AJD & Jancirani, J 2018, ‘Determination of effect of geometrical parameters of a magnetorheological damper for achieving optimum flux’, International Conference on Contemporary Design and analysis of Manufacturing and Industrial Engineering Systems, NIT Trichy, 18-20, January.